SICK TiM320 2D LiDAR sensor – indoor

Contact us for pricing

Specialist LiDAR training courses – booking now

Intelligent, flexible, and user-friendly, the TiM320 2D LiDAR sensor, in its compact IP65 enclosure, suits both mobile and stationary indoor applications.  And with a single unit capable of monitoring up to 235 m² it offers an extremely cost-effective sensing solution.

Low power consumption of as little as 4 W and a scanning range of 4 m make TiM320 perfect for collision avoidance in automated guided vehicle systems (AGV) or presence monitoring in high-bay warehouses.

A ‘touch and teach’ program enables multiple scanning fields with the touch of a button.  16 pre-configured fieldsets – each with three fields; rectangular, radial, and free form – can be selected and evaluated via the input circuit, making deployment of the sensor swift and simple. The dimensions of the field shapes can be easily adjusted using the automated teaching program, which can be activated at the touch of a button – no connection to a computer required.

Add to Wishlist
Add to Wishlist
Category: Tag:



  • Low weight and compact form make this low-cost sensor easy to install into a range of environments
  • Field evaluation using intelligent software algorithms
  • Flexibility and ease of deployment enhanced by easily accessible configuration interface
  • Low power consumption of just 4 W
  • Pre-configured field-sets make commissioning swift and simple
  • One sensor capable of monitoring up to 235 m²


  • Collision detection for AGV systems, mobile robots and rail-mounted transport systems
  • Presence detection in automated warehouses
  • Anti-intruder and anti-encroachment monitoring



Measurement principleHDDM+
Light sourceInfrared (850 nm)
Laser class1 (IEC 60825-1:2014, EN 60825-1:2014)
Aperature angle




Scanning frequency15 Hz
Angular resolution
Working range0.05 m – 4 m
Scanning range

10% reflectivity


2 m

Mechanics and electronics

Connection type1 x M12 12-pin male connector (0.8 m)
Supply voltage9 V DC – 28 V DC
Power consumptionTyp. 4 W, 16 W with 4 max. loaded digital outputs
Housing colour Light blue (RAL 5012)
Enclosure ratingIP65 (IEC 60529:1989+AMD1:1999+AMD2:2013)
Protection classIII (IEC 61140:2016-1)
Weight150 g, without connecting cables
Dimensions6 x 6 x 7.9 cm


Response time1 x  scan, typ. 67 ms

2 x scans, ≤ 134 ms (at +45° to +225° of the working range; max. 150 ms at –45° to +45° of the working range)

Systematic error± 40 mm (typical value at 90% reflectivity up to maximum scanning range- real value depends on ambient conditions)
Statistical error30 mm (typical value at 90% reflectivity up to maximum scanning range- real value depends on ambient conditions)
Integrated applicationField evaluation with flexible fields
Number of field sets16 field triples (48 fields, 1 triple (3 flexible fields) can be configured directly at the scanner)
Simultaneous evaluation cases1 (3 fields)
Detectable object shapeAlmost any






Micro USB

AUX, parameterisation

Digital inputs 4
Digital outputs3 (PNP, additional 1 x device ready)
Delay time67 ms – 30,000 ms (configurable)
Dwell time67 ms – 600,052 ms (configurable)
Optical indicators2 x LEDs (ON, switching status)

Ambient data

Storage temparature-30 °C – +70 °C (IEC 60068-2-14:2009)

Object reflectivity4% – 1000% (reflector)
Electromagnetic compatibility

Emitted radiation

Electromagnetic immunity


Residential area (EN 61000-6-3:2007+AMD:A1:2011)

Industrial environment (EN 61000-6-2:2005)

Vibration resistance

Sine resonance scan

Sine test

Noise test


10 Hz – 1,000 Hz (IEC 60068-2-6:2007)

10 Hz – 500 Hz, 5 g, 10 frequency cycles (IEC 60068-2-6:2007)

10 Hz – 250 Hz, 4.24 g RMS, 5 h (IEC 60068-2-64:2008)

Shock resistance 50 g, 11 ms, ± 3 single shocks / axis (IEC 60068-2-27:2008)

25 g, 6 ms, ± 1,000 continuous shocks / axis (IEC 60068-2-27:2008)

50 g, 3 ms, ± 5,000 continuous shocks / axis (IEC 60068-2-27:2008)

Ambient operating temperature -10 °C – +50 °C (IEC 60068-2-14:2009)
Storage temperature-30 °C – +70 °C (IEC 60068-2-14:2009)
Switch-on temperature-10 °C – +50 °C
Temperature change-10 °C – +50 °C, 10 cycles (EN 60068-2-14:2009)
Damp heat25 °C – 55 °C, 95% rF, 6 cycles (EN 60068-2-30:2005)
Permissable relative humidity




< 80%, non-condensing (EN 60068-2-30:2005)

≤ 90 %, non-condensing (EN 60068-2-30:2005)

Ambient light immunity80,000 lx

Additional information

Weight0.15 kg
Dimensions6cm x 6cm x 7.9cm

Data sheet and downloads

SICK TiM320 2S LiDAR sensor data sheet [PDF]

SICK TiM320 2D LiDAR sensor product overview [PDF]

SICK TiM3xx 2D LiDAR family overview [PDF]






Finance and Shipping

Restrictions on customers

Please note that due to the high average transaction costs, we must adhere to Anti-money laundering legislation.  For new customers, this comes into effect when the transaction value is more than £8,800 (or equivalent in USD or EUR).

Please note that some products are restricted so we typically do a brief check on location and customer information before accepting self-service orders.

Online ordering (self service)

On orders up to £8,800 (or equivalent in USD or EUR), we offer online ordering with payment by all major credit cards. Payments can be made in GBP only.

Payment options for transactions over £8,800

Please contact us to complete our ‘Know Your Customer’ form for payments in advance (by BACS or Card) above this amount, or apply for a full ‘Credit Account’ for up to 30 days credit, on account.  Payments can be made in GBP, EUR or USD.


Shipping by default is by FedEx and typically takes from one to five working days worldwide.  All packages are fully insured from us to you. 

Our incoterms are DDP (for UK customers) and DAP (for international customers, including EU).  Other incoterms may be available on request in special circumstances.

Goods can also be collected from our logistics centre. 

Loan finance

Level Five Supplies is pleased to offer finance as a payment option, iur appointed partners can work with you to make equipment purchase more straightforward.

There are many reasons to consider using finance:

  1. Improves Cash Flow: When you finance your equipment, your cash isn’t tied up in the equipment. Instead, it’s free for other investments that will grow your business, produce income, and ensure the equipment you acquire earns profits over its lifetime.
  2. Preserves Other Lines of Credit: Tomorrow can bring many opportunities. Financing equipment means you’ll have the credit available (either from the bank or other sources) to take advantage of future opportunities.
  3. Hedges against inflation: Your monthly payment remains the same over the term of the lease or loan. Money paid later in the term usually have less purchasing power than those paid at the beginning of the term…so you pay for today’s equipment needs with tomorrow’s lower-value currency.
  4. Provides 100% financing: Even “soft costs” such as training, shipping, installation, and maintenance agreements can usually be included. So you can rest easy knowing that these associated costs won’t disrupt your cash flow.
  5. Simplifies equipment changes: Hiring additional workforce? Increasing efficiency? Additional equipment can easily be added to your existing loan or lease. Or, if you’re trying to stay ahead of the competition by staying ahead of technologies, the equity in your financed equipment can be applied toward the loan or lease of new equipment. These options solve the problems of obsolescence – and make your job easier.
  6. Eliminates hidden charges: You have no compensating balances, no closing costs, and no blanket liens or other restrictive covenants that banks use to increase customers’ cost. What you see is what you get.
  7. Offers excellent rates: Our finance partner rates are highly competitive.
  8. Saves on taxes: Depending on the type of finance agreement you select, as much as 100% of your payments may be tax deductible.
  9. Offers many payment programs: Our finance partners work for you, not us. You choose the type of loan or lease that best fits your needs, and you select the length of the loan or lease term.

The finance agreement is between you and the lender, and we don’t take commission or referral fees – but we’ve done the preparatory work of allocating a broker for the US, and another for Europe, explaining the technology, validating supplier products and explaining how the technology will be used so your application process is simplified and focused entirely on the financials.

The initial part of the process usually takes less than an hour and means that you can spread the cost of a higher value purchase of equipment like this over several months or even years, allowing you to better plan your project or department budgets, but also means you can get what you need over the coming years, not just what you can afford today.

Contact our Sales team to discuss your needs further.  

You may also like…